Qiachip - Give You The Best !
433Mhz Wireless RF Switch DC12V Relay Receiver Module and 433.92 Mhz Remote Controls For DC Motor Forward and Reverse Controller KR1202

433Mhz Wireless RF Switch DC12V Relay Receiver Module and 433.92 Mhz Remote Controls For DC Motor Forward and Reverse Controller KR1202

11 USD9.99 USD

Video Demo:


READ THIS:
This remote control only support the learning code (1527) of the receiver
Compatible with remote control using following chips:
PT1527,EV1527, SCT527, HS1527, SCL1527, FP1527,EV1527

-SPECIFICATION-
1. Working Voltage:DC12V
2. Quiescent Current:5mA
3. Working Frequency:433Mhz
4. Receiving Sensitivity:-104dBm
5. Function option:Momentary/Toggle
6. Modulation Mode:ASK
7. Matching Mode: Intelligent Learning code
8. Output Mode:Dry contact /Voltage output
9. Shell:Yes
10. Working temperature : -30~+80
11. PCB dimension:68.2x48.2(mm)

Deleting existing remote controls data:
  1. Press the learning button on the receiver 8 times;
  2. the existing data on the receiver will be cleared. (Note that data cleared means all the paired remote control will have to re-paired in order to control the receiver relay)
Momentary Mode:
  1. Press the learning button on the receiver once, Led (on the receiver board) switches off.
  2. Press "A button", then press "B button", Led (on the receiver board) switches on, momentary mode successfully set up.
Toggle Mode:
  1. Press the learning button on the receiver twice, Led (on the receiver board) switches off.
  2. Press "A button", then press "B button", Led (on the receiver board) switches on, toggle mode successfully set up.
Toggle Mode 2:
  1. Press the learning button on the receiver 3 times, Led (on the receiver board) switches off.
  2. Press "A button", then press "B button", Led (on the receiver board) switches on, toggle mode 2 successfully set up.
Notes:
1. Remember to disconnect your power source on wiring connection stage. 
2. Please change the remote battery if the remote control range of operation has been narrowed down.
3. Please pay attention to avoid metal mask,large equipment ,strong interference electromagnetic filed when using wireless RF products, and avoid short distance between the remote control and receiver board.
4. Please avoid abnormal use on the product. Abnormal use might reduce product future performance and lifespan, it could even cause safety issues.